CQE Training & Consultancy

Home About Us Latest Updates Training Program ASQ Certification Program Consultancy Services Contact Us

CQE TRAINING & CONSULTANCY PLT (Reg. No. : LLP0003668-LGN)

LATEST UPDATES

CQE_Training_Consultancy_Latest_Updates

(A) Eddie Kuang, is an approved Pembangunan Sumber Manusia Berhad (PSMB) trainer since 1995. (PSMB Cert. Reference No : TTT/0523)

(B) CQE Training & Consultancy Plt is an approved Pembangunan Sumber Manusia Berhad (PSMB) /
Human Resource Development Fund (HRDF) Training Service Provider. (Registration No : LLP0003668-LGN)

(C) Eddie Kuang was elected as ASQ Malaysia Local Member Community (LMC) Chairman since July 2011 for a term of 2 1/2 years until December 2013. Then re-elected again for 2nd. term from Jan 2014 ~ December 2014.

ASQ Malaysia LMC Goals and Objectives:

The Malaysia LMC has formed as a membership group committed to supporting all ASQ programs and services for members in Malaysia. The LMC is the focal point and local contact for the ASQ members in Malaysia and as such the LMC will take on supporting local members, bringing them together, and to involve them in activities and to offer them possibilities to contribute to the society and to quality. The LMC will also strive for a good understanding and cooperation with all other reliable local quality societies located in Malaysia.

Vision: To promote Malaysia towards world class quality

Mission: To provide a communication channel for local quality professional and to enhance quality awareness of local community

LMC Leadership:

2nd. Terms starting Jan 1, 2014 and ending December 31, 2014

LMC Chair: Mr. Eddie Kuang

LMC Vice Chair: Mr. Alex

LMC Secretary: Ms. Loh CC

Communication Chair: Mr. Choo WS

Certification Chair: Mr. Raj Sekar

Membership Chair: Mr. Michael

Area Chair (North): Mr. Koay LS

Area Chair (Central): Mr. Jasmi Sulaiman

Area Chair (South): Ms. Sumitha
Area Chair (East): Mr. Terrance

(D) The Management of CQE Training & Consultancy has decided to establish an operating office in Taiping as as part of our company efforts to make a better and strong present in Taiping in order we can provide and extend our training and consultancy services to local industries, closer and faster. We are in the progress to setup a new office in Taiping nearby Barrack Road. The office will be ready in 2~3 months duration.

(E) The Management of CQE Training & Consultancy has taken initiatives to develop and create few blogs related to our training & consultancy services. These are:-

1) CQE Certified Quality Engineer --> http://cqeblog.blogspot.com

2) CSSBB Certified Six Sigma Black Belt --> http://asqcssbb.blogspot.com

3) CMQ/OE Certified Manager of Quality/Organizational Excellence --> http://cmqoe.blogspot.com

Happy Blogging and Exploring!!!

(F) ASQ recently published in the January 2012 Quality Progress magazine to recognize the efforts of individual to assist ASQ to recruit their colleagues and friends becomes ASQ members. Eddie Kuang Kok Hoo is one of the high achiever! Cheers!

Click here for the link to "Keep Current" news. Please scroll down to the bottom Pg. 15 "By The Numbers" article.

Latest Updates News & Articles Resources Blogs

Home

About Us

◦

Company Profile

Vision & Mission

Quality Policy & Objectives

About Top Management

◦	ASQ - Eddie Kuang

Latest Updates

Training Program

◦	ISO9001:2015 QMS Introductory & Awareness Training
◦	ISO14001:2015 EMS Introductory & Awareness Training
◦	ISO9001:2015 QMS Effective Process Approach Internal Quality Auditing
◦	ISO14001:2015 EMS Effective Process Approach Internal Auditing Training
◦	ISO9001:2015 Quality Documentation Systems
◦	IATF16949:2016 Automotive QMS Introductory & Awareness Training
◦	OHSAS18001:2007 OSH Internal Auditing Training
◦	ISO14001:2015 EMS & OHSAS18001:2007 OSH Management Systems Internal Auditing Training
◦	ISO13485:2016 Medical Devices Introductory & Awareness Auditing Training
◦	ISO13485:2016 Medical Devices Internal Auditing Training
◦	Integrated Quality, Environemntal and Safety Management Systems Introductory Training
◦	Effective Quality, Environmental and Safety Mgmt Systems Internal Audit Training
◦	ISO26000 Corporate Social Responsibility (CSR) Introductory & Awareness Training
◦	Guidance on Corporate Social Responsibility (CSR) Training Based on EICC
◦	7 Quality Control Tools
◦	7 Steps Problem Solving Process Methodology
◦	Quality Control Circles (QCC) & 7 QC Tools
◦	7 Basic QC Tools & 7 New Management and Planning Tools
◦	Root Cause Analysis (RCA)
◦	5S Housekkeping Towards Good Manufacturing Practices
◦	Gemba Kaizen Continuous Improvement
◦	ElectroStatic Discharge Programme (ESDP)
◦	Lean Manufacturing
◦	Value Stream Mapping (VSM)
◦	Single Minute Exchange of Die (SMED) or Quick Changeover
◦	Total Productive Maintenance (TPM)
◦	Poka Yoke Mistake Proofing Manufacturing
◦	Cycle Time Management (CTM)
◦	Process Validation Training
◦	IATF16949:2016 Automotive QMS Introductory & Awareness Training
◦	Advanced Prodcut Quality Planning (APQP)
◦	Production Part Approval Process (PPAP)
◦	Failure Mode & Effects Analysis (FMEA)
◦	Measurement System Analysis (MSA)
◦	Statistical Process Control (SPC)
◦	VDA 6.3 Effective Process Audit Methodology (German Automotive)
◦	Creative 8D Problem Solving Methodology
◦	FMEA and HIRARC Training
◦	Introduction to 6 Sigma Improvement Methodology
◦	Productivity Improvement Techniques towards Maintaining Competitiveness
◦	Acceptance Sampling Plan (ASP)
◦	Metrology, Measurement & Calibration
◦	Statistical Analysis Tools
◦	High Impact and Effective Application of Manufacturing Statistics
◦	Design of Experiment (DOE) towards Product and Process Optimization
◦	MINITAB Software Application Training

2023 Training Calendar

2022 Training Calendar

2021 Training Calendar

ASQ Certification Program

◦	Ideal Certification Order
◦	CQE Certified Quality Engineer
◦	CQA Certified Quality Auditor
◦	CQT Certified Quality Technician
◦	CMQ/OE Certified Manager of Quality/Organizational Excellence
◦	CSSGB Certified Six Sigma Green Belt
◦	CSSBB Certified Six Sigma Black Belt
◦	CRE Certified Reliability Engineer
◦	CQIA Certified Quality Improvement Associate
◦	CMBB Certified Master Black Belt
◦	CSQE Certified Software Quality Engineer
◦	CQPA Certified Quality Process Analyst
◦	CFSQA Certified Food Safety and Quality Auditor
◦	CMDA Certified Medical Device Auditor
◦	CQI Certified Quality Inspector
◦	CCT Certified Calibration Technician
◦	CPGP Certified Pharmaceutical GMP Professional
◦	CSQP Certified Supplier Quality Professional
◦	CSSYB Certified Six Sigma Yellow Belt
◦	Lean Certification (SME/AME/Shingo Prize/ASQ Partnership)

HRDF Collaboration Program

◦	The ASQ CQE Course Synopsis & Outlines
◦	ASQ CQE Lesson Plan Strcuture
◦	ASQ CQE Training Schedule May2015
◦	CQE Training & Consultancy Company Profile
◦	Trainer CV / Bio Data
◦	Download Registration Form
◦	HRDF Collaboration Approval Letter

Consultancy Services

News & Articles

◦	History of Quality
◦	7 Basic Quality Tools
◦	7 New Management & Planning Tools
◦	6 Sigma Quality Improvement Concepts

Resources

◦	Website Resources
◦	Books & Study Materials
◦	ASQ Certification Handbooks
◦	Dr Joseph M. Juran's Reference Books
◦	Dr Edward W. Deming's Reference Books
◦	Dr Walter A. Shewhart's Reference Books
◦	Dr Philip B. Crosby's Reference Books
◦	Dr Armand V. Feigenbaum's Reference Books
◦	Dr Kaoru Ishikawa's Reference Books
◦	Dr Genichi Taguchi's Reference Books
◦	Kaizen Masaki Imai's Reference Books
◦	Dr Shigeo Shingo's Reference Books
◦	Taiichi Ohno's Reference Books

Quality Gurus

◦	Dr. Joseph M. Juran Reference Books
◦	Dr. Edward W. Deming's Reference Books
◦	Dr. Walter A. Shewhart's Reference Books
◦	Dr. Philip B. Crosby's Reference Books
◦	Dr. Armand V. Feigenbaum's Reference Books
◦	Dr. Kaoru Ishikawa's Reference Books
◦	Dr. Genichi Taguchi's Reference Books
◦	Kaizen Masaki Imai's Reference Books
◦	Dr. Shigeo Shingo's Reference Books
◦	Taiichi Ohno's Reference Books